Page 179 - CDR Product Catalogue - issue 2
P. 179

                  ENERGY CONTROL
Timers & PIRs
Touch Timers
With the reliability of a fully electronic unit, with no mechanical moving parts, it has all the features of the Elkay pushbutton timer unit with the additional benefit of tactile, feather light touch activation.
Variable timing selection, a backlit blue neon indicator ring and automatic reset are all part of this feature-packed device. It is also suitable for multi-way applications thanks to 2 wire, 3 wire and slave switch options.
PIR Timers
The PIR timer is a fully automatic device which controls various power loads through the detection of body heat.
Activated by the detection of infra-red heat, the lighting or power source will then stay on for a preset period of time. If infra-red heat is no longer detected, the time period will elapse and the load will be switched off.
An internal light sensor will keep the lighting switched off when sufficient ambient light is available, further increasing the energy saving potential of the pirtimer. The unit also has an override switch on the faceplate.
        Part No.
    2235A-1
3 Wire Touch Timer
2 Wire Touch Timer
Slave Unit
Ceiling Mounted PIR
16A 2min - 2hr
16A 2min - 2hr
16A -
3 Wire PIR Timer 16A
2 Wire PIR Timer 16A
Slave Unit 16A
Pneumatic Timers
2 min - 1hr
2 min - 1hr
-
Description
Rating
Timing Range
   360A-1
   360A-3
Part No.
370A-1
Description
Rating
Timing Range
 376A-1
 376A-3
      This PIR timer unit has been designed for ceiling mounting and includes spring fixing arms for quick and easy installation. This compact unit, once installed, sits flush mounted in the ceiling.
The ceiling mount PIR is activated by the detection of moving body heat and has the added feature of a red indicator LED to signify when the timing has been re-triggered and the unit is in its final minute of operation.
An internal light sensor will keep the lighting switched off when sufficient ambient light is available.
Ceiling Mounted PIR 10A 2 min - 1hr
The Columbus® timer is an easy to fit and cost effective way of automatically turning lighting off after a set period of time. Pushing the button activates the time delay, which can be set at installation anywhere between 5 seconds to 5 minutes.
The unit has normally open or change over contacts as standardand can be fitted to existing single gang switches, making it a perfect low cost energy saviong solution in areas such as stairways and storerooms.
Part No.
Description
Rating
Timing Range
       Part No.
Description
Rating
Timing Range
400A
Columbus Timer
Columbus Timer (Extra Contacts)
3-6A 5 sec - 5 min
3-6A 5 sec - 5 min
   400A-3
  374B-1
           Together we generate value
179







































   177   178   179   180   181